Why this product:
Normal salt sodium chloride is highly corrosive in nature, it have a negative effect on electroplate, again it is hygroscopic and dissolve in water hence easily washed away, require recharge by time to time if not then face fault. The other component is coal which has a tendency to become ash with high heat again the ash can’t hold water, result earthing pit fault. Our product has a good water holding capacity which ensure good ion despite by means of ion exchange with electron.

Advantages:

• Good capacity to clear the fault current and helps to overcome electrical hazardous.
• Easy to mix ingredient, pigments and perfumes due to high absorbent capacity.
• Unique water absorption, good water holding capacity and odor controlling.
• Easy to spread over open air ground due to granules form for pet animals.
• No need to add extra salt or coal, it’s a readymade product to use.
• Can maintain the moisture for long duration no need to recharge.
• Unused material stays intact and can continue to use.
• Clump when wet it is easy to remove and disposed it.
• Non corrosive product, no corrosion of electroplates.
• It stays last longer with less frequency changing.
• Allows least ohmic value fluctuation.
• Reduce soil resistivity and easily compact.
• It can absorb up-to 100% of water.
• Even can use at desert area.
• Easily compact.

How to use:

• It’s recommended to mix with fresh water available at the site. This will hold its shape and adhere to the walls of the electrode to provide a direct contact between the earth and the electrode. With its ability to retain the water the compound always hydrated within the bed irrespective of the surface temperature.
• In case of cost effective mix at least 40% of compound with site’s soil and fill the pit then watering the pit for good result use layer formation to watering.

IMPORTANCE OF EARTHING

Earthing is necessary to eliminate electrostatic/ discharge to take care of sensitive equipment as well as uninterrupted power supply. The conventional earthing/unhealthy grounding can either damage or destroy the valuable equipment’s. In fact this type of invisible interruption may arrest the flow of fast dynamic or static current, which will have the negative effect on the sensitive parts of the valuable equipment’s which leads to  great amount of damage and loss of lives.

OBJECTIVES OF EARTHING

• Prime objective of earthing is to provide a zero potential surface in and around and under the area where the electrical equipment is installed or erected.
• To achieve this objective the non – current carrying parts of the electrical equipment is connected to the general mass of the earth which prevents the appearance of dangerous voltage on the enclosures and helps to provide safety and valuable property.